Typical overview of the Mezzanine floor lifter: The lift will be constructed using a single mast which must be bolted to the building block-work to provide additional support to the load legs. The lift platform will measure approximately 1500mm wide by 1250mm deep and will close down over the legs. The platform will feature 1100mm high rails on all sides and a single outwards opening gate on the right hand side of the mast. The gate will be spring loaded and will lock with a gravity system but will also be sensed to prevent platform movement if the gate is open. For more information on this range of products please contact us or call 01553 811977.

Manufacture and install 1 off External guard system for both upper and lower floors

• The lower level will be totally enclosed from floor to the underside of the Mezzanine
• The upper level will be enclosed on 2 sides fixed rails + 2 sides of the platform saloon style gates
• Both enclosures will feature a single out-ward opening gate and will be fitted with an electrical interlock to prevent opening when the lift is not parked.
• Both enclosures will be in-filled with mesh to prevent access to the lift.